Menu item
Menu item
Functions
Direct access button
See
“Crane operation”
“Tare”
Set load display to zero
“Log in”
Log in the transmitter on the receiver.
Checking, switching on and releasing prior to beginning work
“Log out”
Log out the transmitter from the receiver.
“Tandem login”
Log in the transmitter on the second crane for tandem operation.
“Tandem logout”
Log out the transmitter from the second crane in tandem operation.
“Lighting”
Switch the crane lighting on and off.
“Sway control on”
Switch on the sway control and set the length of the load lifting attachment.
“Sway control off”
Switch sway control off.
“Select trolley”
Switch between trolley I, trolley II and trolley III
(not available)
“Select crane”
Switch between the first and second crane in individual operation and tandem operation.
(not available)
(not available as menu item)
Override travel limit switch of a bypass control.
“Sup.pre.lift on”
Switch on super-precision lifting on the wire rope hoist.
“Sup.pre.lift off”
Switch off super-precision lifting on the wire rope hoist.
“Freq. change”
Allow the transmitter to search for a new radio channel.
“Teach-In”
Perform teach-in with an electronic hoist limit switch.
“Positioning”
Approach positions of a positioning control.
“Option 1”
to
“Option 6”
Switch additional functions (1 to 6).
Using additional functions on the crane with direct access buttons
“Settings”
“Battery”
Displaying the remaining battery charging time and set the alarm
“Transmitter no.”
Set the number of the transmitter which will be shown on the display.
“Crane no.”
Set the number of the crane which will be shown on the display.
“Standby”
Set the time which elapses before the transmitter changes to “Standby”.
“Backlight”
Setting the display light
“Language”
Select the language for menus and messages.
“Crane type”
Select the crane type (overhead travelling crane or jib crane) for display symbols
“Direct access”
“◄ key”
Select the assignment of the direct access button.
“▼ key”
Select the assignment of the direct access button.
“▲ key”
Select the assignment of the direct access button.
“► key”
Select the assignment of the direct access button.
“Info”
Display the electronic type plate