Performing teach-in with an electronic hoist limit switch

Only with chain hoists with an electronic hoist limit switch

 

With a chain hoist with electronic hoist limit switch, the “Teach-In” function can be used to set the switching point of the hoist limit switch. See the “Hoist limit switch” documentation.

This function can be opened in the menu or using a direct access button.

 

Menu item “Teach-In”	Direct access button “Teach-In”

   Either:

Press and hold the direct access button “Teach-In” (T with arrow) until the position is saved.

Or:

Open the main menu with the MENU button,

open the menu “Crane operation”,

open the menu item “Teach-In” and press and hold ENTER until the position is saved.

●   The current position of the load hook is saved.