Positioning

Only with positioning control

 

The positioning control enables crane and trolley to halt at previously specified positions within the traversing range.

This function can only be opened using a direct access button.

 

	Direct access button “Positioning”

   Move crane or trolley up to the point just in front of the desired position.

   Press the direct access button “Positioning” (vertical line with arrows) and hold it.

●   Now move the crane or trolley only at low speed.

   Continue moving the crane with the “Positioning” direct access button pressed.

●   As soon as the position is reached, the crane or trolley halts.

●   The “Position reached” signal lamp lights up.