Note:

Synthetic lubricants must not be mixed with mineral-based lubricants!

On-site lubrication with “Molykote PG-75”, ABUS item number 5168.

Lubrication ex works with “Molykote PG-75”, ABUS item number 411.

Lubricate the wire rope during:

─     Wire rope change

─     Cable guide change

─     Regular inspection

─     General overhaul

For details, see Cleaning and lubricating the cable drum.

On-site lubrication with “Chainlife S”, ABUS item number 2717

Lubrication ex works with “Chainlife S”, ABUS item number 2718.

Alternatives:

─     Castrol “Viscogen KL 23”

─     Klüber “Grafloscon CA 901 Ultra Spray”

─     Optimol “KL 23”

─     Shell “Malleus GL 95”

Lubricate the wire rope during:

─     Wire rope change

─     Regular inspection

─     General overhaul

For details, see Cleaning and lubricating the cable drum.

On-site lubrication with “High temperature paste PBC 1574”, ABUS item number 6758.

Lubrication ex works with “High-Lub LT1 EP”, ABUS item number 317880.

Lubricate the wheel carrier during:

─     Assembly and disassembly

─     General overhaul

For details, see Installing the wheel carrier.

On-site lubrication with “High temperature paste PBC 1574”, ABUS item number 6758.

Lubrication ex works with “High-Lub LT1 EP”, ABUS item number 317880.

Lubricate bracket during:

─     Assembly and disassembly

─     General overhaul

For details, see Installing the bracket and a new rubber spring element.

On-site lubrication with “High temperature paste PBC 1574”, ABUS item number 6758.

Lubrication ex works with “High-Lub LT1 EP”, ABUS item number 317880.

Lubricate fixed point crosshead during:

─     Assembly and disassembly

─     General overhaul

For details, see Changing the reeving to 4/1.

On-site lubrication with “High temperature paste PBC 1574”, ABUS item number 6758.

Lubrication ex works with “High-Lub LT1 EP”, ABUS item number 317880.

Lubricate the rope socket during:

─     Wire rope change

─     Regular inspection

─     General overhaul

For details, see Installing the fixed point.

On-site lubrication with “High temperature paste PBC 1574”, ABUS item number 6758.

Lubrication ex works with “High-Lub LT1 EP”, ABUS item number 317880.

Lubricate deflection roller crosshead during:

─     Assembly and disassembly

─     General overhaul

For details, see Changing the reeving to 4/1.

On-site lubrication with “High temperature paste PBC 1574”, ABUS item number 6758.

Lubrication ex works with “High-Lub LT1 EP”, ABUS item number 317880.

Lubricate the load hook crosshead during:

─     Assembly and disassembly

─     General overhaul

On-site lubrication with “Molykote PG-75”, ABUS item number 5168.

Lubrication ex works with “High-Lub LT1 EP”, ABUS item number 317880.

Lubricate the deep groove ball thrust bearing during:

─     Assembly and disassembly

─     General overhaul