Select
parameter P 1.1 with the arrow buttons.In this parameter you set the motor type. For ABUS motors, tables in which the respective motor type can be read are provided in the following pages. The corresponding number can be selected in the parameter.
Select
parameter P 1.1 with the arrow buttons.
Press Enter briefly.
● The parameter is opened.
Select motor type according to
the tables below.
Select the
corresponding number of the motor type with the arrow buttons.
Press Enter briefly.
● The value is saved.
Note
If a motor type was selected from the table, the parameters P 1.2 and P 1.3 do not need to be set. These are then set automatically.
If the motor type is not shown in the table or corresponds to the number 0:
Select 0 as the number.
Set parameters P 1.2 and
P 1.3. See P 1.2
Winding resistance.
Selection of the motor type for voltage range 3 (star connection):
380 V – 415 V, 50 Hz // 440 V – 480 V, 60 Hz
|
Hoist motor |
Current transformer module | |||||||
|
Hoist |
Motor type Input of P1.1 |
P [kW] 50 Hz 12/2-pin |
IN [A] 12/2-pin |
R [in Ohm] Input of P1.2 |
Measurement range |
IN [A] |
Correction factor P 1.3 |
Article number |
|
Third-party motor |
0 |
See type plate |
Measure |
Select the current transformer module according to the rated current and enter the correction factor of the corresponding current transformer module. | ||||
|
GM800 L.4 |
1 |
0.28/1.9 |
1.8/5.0 |
28.2/4.06 |
I |
8 |
306 |
9743 |
|
GM800 H.4 |
2 |
0.45/3.2 |
3.1/7.2 |
21.0/2.16 |
I |
8 |
306 |
9743 |
|
GM800 U.4 |
0 |
0.55/4.0 |
4.0/8.5 |
17.6/1.76 |
I |
8 |
306 |
9743 |
|
GM1000 L.6 |
3 |
0.45/3.0 |
2.4/7.7 |
18.6/2.16 |
I |
8 |
306 |
9743 |
|
GM1000 H.6 |
4 |
0.8/4.9 |
4.4/11.2 |
11.2/1.3 |
II |
16 |
613 |
9744 |
|
GM1000 U.6 |
0 |
0.9/6.0 |
4.6/13 |
10.2/1.05 |
II |
16 |
613 |
9744 |
|
GM2000 L.3 |
5 |
0.8/4.9 |
4.4/11.2 |
11.2/1.3 |
II |
16 |
613 |
9744 |
|
GM2000 H.3 |
6 |
1.1/7.6 |
5.1/15.9 |
8.65/0.79 |
II |
16 |
613 |
9744 |
|
GM3000 L.4 |
7 |
1.2/7.4 |
5.6/15.3 |
10.4/1.0 |
II |
16 |
613 |
9744 |
|
GM3000 H.4 |
8 |
1.9/12.3 |
8.2/22.9 |
6.65/0.51 |
III |
23 |
873 |
9745 |
|
GM5000 L.3 |
9 |
1.9/12.3 |
8.2/22.9 |
6.65/0.51 |
III |
23 |
873 |
9745 |
|
GM5000 H.3 |
10 |
2.9/18.8 |
12.2/34 |
3.97/0.27 |
IV |
36 |
1381 |
9746 |
|
GM6000 L |
11 |
2.9/18.8 |
12.2/34 |
3.97/0.27 |
IV |
36 |
1381 |
9746 |
|
GM7000 L |
13 |
2.4/16 |
11/29.5 |
4.48/0.42 |
IV |
36 |
1381 |
9746 |
|
GM7000 H |
14 |
4.8/32 |
22/59 |
2.24/0.212 |
V |
60 |
2344 |
9747 |
|
GM7000 M |
15 |
3/20 |
13.5/39.5 |
3.97/0.27 |
IV |
36 |
1381 |
9746 |
|
GM7000 U |
16 |
6/40 |
27/79 |
1.99/0.135 |
VI |
136 |
5169 |
19682 |
|
GM1000 H |
17 |
0.8/4.9 |
4.4/11.2 |
8.5/1.3 |
II |
16 |
613 |
9744 |
Selection of the motor type for voltage range 3 (delta connection):
220 V – 240 V, 50 Hz // 255 V – 280 V, 60 Hz
|
Hoist motor |
Current transformer module | |||||||
|
Hoist |
Motor type Input of P1.1 |
P [kW] 50 Hz 12/2-pin |
IN [A] 12/2-pin |
R [in Ohm] Input of P1.2 |
Measurement range |
IN [A] |
Correction factor P 1.3 |
Article number |
|
Third-party motor |
0 |
See type plate |
Measure |
Select the current transformer module according to the rated current and enter the correction factor of the corresponding current transformer module. | ||||
|
GM800 L.4 |
0 |
0.28/1.9 |
3.1/8.7 |
4.7/0.677 |
I |
8 |
306 |
9743 |
|
GM800 H.4 |
0 |
0.45/3.2 |
5.4/12.5 |
7/0.72 |
II |
16 |
613 |
9744 |
|
GM800 U.4 |
0 |
0.55/4.0 |
6.9/14.7 |
5.86/0.585 |
II |
16 |
613 |
9744 |
|
GM1000 L.6 |
0 |
0.45/3.0 |
4.2/12.8 |
6.15/0.707 |
II |
16 |
613 |
9744 |
|
GM1000 H.6 |
0 |
0.8/4.9 |
7.6/19.4 |
3.70/0.43 |
III |
23 |
873 |
9745 |
|
GM1000 U.6 |
0 |
0.9/6.0 |
8.0/22.5 |
3.4/0.35 |
III |
23 |
873 |
9745 |
|
GM2000 L.3 |
0 |
0.8/4.9 |
7.6/19.4 |
3.70/0.43 |
III |
23 |
873 |
9745 |
|
GM2000 H.3 |
0 |
1.1/7.6 |
8.8/27.5 |
2.9/0.26 |
IV |
36 |
1381 |
9746 |
|
GM3000 L.4 |
0 |
1.2/7.4 |
9.7/26.5 |
3.45/0.33 |
IV |
36 |
1381 |
9746 |
|
GM3000 H.4 |
0 |
1.9/12.3 |
14.2/39.7 |
22.2/0.17 |
IV |
36 |
1381 |
9746 |
|
GM5000 L.3 |
0 |
1.9/12.3 |
14.2/39.7 |
2.22/0.17 |
IV |
36 |
1381 |
9746 |
|
GM5000 H.3 |
0 |
2.9/18.8 |
21.1/59 |
1.31/0.09 |
V |
60 |
2344 |
9747 |
|
GM6000 L |
0 |
2.9/18.8 |
21.1/59 |
1.31/0.09 |
V |
60 |
2344 |
9747 |
|
GM7000 L |
0 |
2.4/16 |
19.1/51 |
1.49/0.141 |
V |
60 |
2344 |
9747 |
|
GM7000 H |
0 |
4.8/32 |
38.2/102 |
0.745/0.07 |
VI |
136 |
5169 |
19682 |
|
GM7000 M |
0 |
3/20 |
23.4/69 |
1.31/0.09 |
VI |
136 |
5169 |
19682 |
|
GM7000 U |
0 |
6/40 |
46.8/138 |
0.44/0.045 |
VI |
136 |
5169 |
19682 |
Selection of the motor type for voltage range 5 (star connection):
460 V – 500 V, 50 Hz // 550 V – 600 V, 60 Hz
|
Hoist motor |
Current transformer module | |||||||
|
Hoist |
Motor type Input of P1.1 |
P [kW] 50 Hz 12/2-pin |
IN [A] 12/2-pin |
R [in Ohm] Input of P1.2 |
Measurement range |
IN [A] |
Correction factor P 1.3 |
Article number |
|
Third-party motor |
0 |
See type plate |
Measure |
Select the current transformer module according to the rated current and enter the correction factor of the corresponding current transformer module. | ||||
|
GM800 L.4 |
0 |
0.28/1.9 |
1.5/4.1 |
20.3/2.9 |
I |
8 |
306 |
9743 |
|
GM800 H.4 |
0 |
0.45/3.2 |
2.6/6 |
25.4/2.59 |
I |
8 |
306 |
9743 |
|
GM800 U.4 |
0 |
0.55/4.0 |
3.3/7.1 |
26.1/2.5 |
I |
8 |
306 |
9743 |
|
GM1000 L.6 |
0 |
0.45/3.0 |
2.6/6.2 |
26.8/3.07 |
I |
8 |
306 |
9743 |
|
GM1000 H.6 |
0 |
0.8/4.9 |
3.7/9.3 |
15.45/1.94 |
II |
16 |
613 |
9744 |
|
GM1000 U.6 |
0 |
0.9/6.0 |
3.8/10.8 |
15.5/1.32 |
II |
16 |
613 |
9744 |
|
GM2000 L.3 |
0 |
0.8/4.9 |
3.7/9.3 |
15.45/1.97 |
II |
16 |
613 |
9744 |
|
GM2000 H.3 |
0 |
1.1/7.6 |
4.3/13.3 |
12.5/1.14 |
II |
16 |
613 |
9744 |
|
GM3000 L.4 |
0 |
1.2/7.4 |
4.7/12.7 |
15.8/1.46 |
II |
16 |
613 |
9744 |
|
GM3000 H.4 |
0 |
1.9/12.3 |
6.8/19.1 |
9.15/0.67 |
III |
23 |
873 |
9745 |
|
GM5000 L.3 |
0 |
1.9/12.3 |
6.8/19.1 |
9.15/0.67 |
III |
23 |
873 |
9745 |
|
GM5000 H.3 |
0 |
2.9/18.8 |
10.2/28.3 |
5.6/0.414 |
IV |
36 |
1381 |
9746 |
|
GM6000 L 3 |
0 |
2.9/18.8 |
10.2/28.3 |
5.6/0.414 |
IV |
36 |
1381 |
9746 |
|
GM7000 L |
0 |
2.4/16 |
9.2/24.6 |
6.15/0.64 |
IV |
36 |
1381 |
9746 |
|
GM7000 H |
0 |
4.8/32 |
18.4/49.2 |
3.075/0.32 |
V |
60 |
2344 |
9747 |
|
GM7000 M |
0 |
3/20 |
11.3/33 |
5.6/0.414 |
IV |
36 |
1381 |
9746 |
|
GM7000 U |
0 |
6/40 |
22/66 |
2.8/0.207 |
V |
60 |
2344 |
9747 |
Selection of the motor type for voltage range 1 (star connection):
300 V – 335 V, 50 Hz // 360 V – 400 V, 60 Hz
|
Hoist motor |
Current transformer module | |||||||
|
Hoist |
Motor type Input of P1.1 |
P [kW] 50 Hz 12/2-pin |
I [A] 12/2-pin |
R [in Ohm] Input of P1.2 |
Measurement range |
IN [A] |
Correction factor P 1.3 |
Article number |
|
Third-party motor |
0 |
See type plate |
Measure |
Select the current transformer module according to the rated current and enter the correction factor of the corresponding current transformer module. | ||||
|
GM800 L.4 |
0 |
0.34/2.3 |
2.3/8.3 |
8.9/1.28 |
I |
8 |
306 |
9743 |
|
GM800 H.4 |
0 |
0.54/3.8 |
3.9/9.1 |
13.3/1.35 |
II |
16 |
613 |
9744 |
|
GM800 U.4 |
0 |
0.66/4.8 |
5.0/10.7 |
11.1/1.08 |
II |
16 |
613 |
9744 |
|
GM1000 L.6 |
0 |
0.54/3.6 |
3/9.3 |
11.7/1.34 |
II |
16 |
613 |
9744 |
|
GM1000 H.6 |
0 |
0.96/5.9 |
5.5/14 |
7.08/0.82 |
II |
16 |
613 |
9744 |
|
GM1000 U.6 |
0 |
1.1/7.2 |
5.8/16.4 |
6.37/0.59 |
II |
16 |
613 |
9744 |
|
GM2000 L.3 |
0 |
0.96/5.9 |
5.5/14 |
7.08/0.82 |
II |
16 |
613 |
9744 |
|
GM2000 H.3 |
0 |
1.3/9.1 |
6.4/20 |
5.47/0.5 |
III |
23 |
873 |
9745 |
|
GM3000 L.4 |
0 |
1.44/8.9 |
6.7/18.3 |
6.65/0.59 |
III |
23 |
873 |
9745 |
|
GM3000 H.4 |
0 |
2.3/14.8 |
9.8/27.5 |
4.09/0.34 |
IV |
36 |
1381 |
9746 |
|
GM5000 L.3 |
0 |
2.3/14.8 |
9.8/27.5 |
4.09/0.34 |
IV |
36 |
1381 |
9746 |
|
GM5000 H.3 |
0 |
3.5/22.6 |
15.3/43 |
2.6/0.15 |
V |
60 |
2344 |
9747 |
|
GM6000 L 3 |
0 |
3.5/22.6 |
15.3/43 |
2.6/0.15 |
V |
60 |
2344 |
9747 |
|
GM7000 L |
0 |
2.9/19.2 |
11.6/31 |
2.79/0.268 |
IV |
36 |
1381 |
9746 |
|
GM7000 H |
0 |
5.8/38.4 |
23.2/62 |
1.4/0.134 |
V |
60 |
2344 |
9747 |
|
GM7000 M |
0 |
3.6/24 |
14.2/42 |
2.6/0.15 |
V |
60 |
2344 |
9747 |
|
GM7000 U |
0 |
7.2/48 |
28.4/84 |
1.3/0.075 |
VI |
136 |
5169 |
19682 |
Selection of the motor type for voltage range 1 (delta connection):
175 V – 195 V, 50 Hz // 208 V – 230 V, 60 Hz
|
Hoist motor |
Current transformer module | |||||||
|
Hoist |
Motor type Input of P1.1 |
P [kW] 50 Hz 12/2-pin |
IN [A] 12/2-pin |
R [in Ohm] Input of P1.2 |
Measurement range |
IN [A] |
Correction factor P 1.3 |
Article number |
|
Third-party motor |
0 |
See type plate |
Measure |
Select the current transformer module according to the rated current and enter the correction factor of the corresponding current transformer module. | ||||
|
GM800 L.4 |
0 |
0.34/2.3 |
4/10.9 |
2.95/0.42 |
II |
16 |
613 |
9744 |
|
GM800 H.4 |
0 |
0.54/3.8 |
6.7/15.7 |
4.4/0.45 |
II |
16 |
613 |
9744 |
|
GM800 U.4 |
0 |
0.66/4.8 |
8.7/18.5 |
3.7/0.36 |
III |
23 |
873 |
9745 |
|
GM1000 L.6 |
0 |
0.54/3.6 |
5.2/16 |
3.88/0.44 |
II |
16 |
613 |
9744 |
|
GM1000 H.6 |
0 |
0.96/5.9 |
9.5/24.2 |
2.33/0.27 |
III |
23 |
873 |
9745 |
|
GM1000 U.6 |
0 |
1.1/7.2 |
10.0/28.3 |
2.13/0.20 |
IV |
36 |
1381 |
9746 |
|
GM2000 L.3 |
0 |
0.96/5.9 |
9.5/24.2 |
2.33/0.27 |
III |
23 |
873 |
9745 |
|
GM2000 H.3 |
0 |
1.3/9.1 |
11.1/35 |
1.80/0.166 |
IV |
36 |
1381 |
9746 |
|
GM3000 L.4 |
0 |
1.44/8.9 |
11.6/31.7 |
2.22/0.196 |
IV |
36 |
1381 |
9746 |
|
GM3000 H.4 |
0 |
2.3/14.8 |
17/47.6 |
1.366/0.114 |
V |
60 |
2344 |
9747 |
|
GM5000 L.3 |
0 |
2.3/14.8 |
17/47.6 |
1.366/0.114 |
V |
60 |
2344 |
9747 |
|
GM5000 H.3 |
0 |
3.5/22.6 |
26.5/74 |
0.866/0.05 |
VI |
136 |
5169 |
|
|
GM6000 L 3 |
0 |
3.5/22.6 |
26.5/74 |
0.866/0.05 |
VI |
136 |
5169 |
|
|
GM7000 L |
0 |
2.9/19.2 |
20.1/54 |
0.93/0.09 |
V |
60 |
2344 |
9747 |
|
GM7000 H |
0 |
5.8/38.4 |
40.2/108 |
0.465/0.045 |
VI |
136 |
5169 |
19682 |
|
GM7000 M |
0 |
3.6/24 |
25/73 |
0.866/0.05 |
VI |
136 |
5169 |
19682 |
|
GM7000 U |
0 |
7.2/48 |
50/146 |
0.433/0.025 |
VI |
136 |
5169 |
19682 |