Only with electric trolley EF
Gear rims on the wheel
|
|
On-site lubrication with “High-Lub LT1 EP”, ABUS item number 318490.
Lubrication ex works with “High-Lub LT1 EP”, ABUS item number 317880.
Quantity: Apply a liberal coating of lubricant using a brush.
Alternative:
─ “High-Lub °318490 (cartridge with 400 g)”
Lubricate the gear rim for:
─ Removing and fitting the drive
─ General overhaul
Regularly check that the gear
rims are completely lubricated and the lubricant is not dirty.
If the lubricant is dirty: Clean
the gear rims and reapply lubricant.
For details, see Lubricating the gear rim.
Gear unit on drive with the helical gear unit
|
|
Lubrication ex works using lubricant with the standard designation GP 00 K-45 (DIN 51502)
Quantity:
─ Size 80/112: 130 cm³
─ Size 140: 200 cm³
The gear unit is lubricated ex
works for its entire length of service.
Gear unit on drive with the planetary gear unit
|
|
Lubrication ex works using lubricant with the standard designation KOK-35 (DIN 51502)
Quantity: 50 g
The gear unit is lubricated ex
works for its entire length of service.