In dangerous situations with the crane:

    Press the stop button.

●   The transmitter sends a stop signal to the receiver.

●   The ready signal, which usually keeps transmitting a signal to the receiver, is interrupted.

●   The receiver receives the stop signal and stops receiving any ready signals from the transmitter.

●   The receiver activates the emergency stop on the crane.

●   The crane brakes immediately and comes to a standstill.

When the danger has been eliminated:

    Turn the stop button clockwise by a quarter rotation.

●   The transmitter switches on and logs into the receiver.

●   If the transmitter is protected by a PIN: The window “Enter PIN” appears on the display.

    Enter the previously defined PIN for the desired protected function. See Entering the code or PIN.

    Press ENTER.

●   The display shows “Release”.

    Press the HORN flip switch and let it go.

●   The sound of the horn can be heard at the crane.

●   The crane is ready for use.