The qualified person inspecting the crane with ABULiner is responsible for the type and scope of the test.

In addition to the points described here, all points outlined in the other supplied product manuals must also be checked.

The decision as to whether the crane is in perfect condition may be made only by the person inspecting the crane. Any inadequacies, if found, must be eliminated. The examiner decides whether the crane has to be tested again afterward.

If locally applicable regulations specify further tests, these are also to be carried out.

Additionally, at least this following point must be checked:

    During normal operative travel of the highest hook position: Check hoist limiter. See Checking hoist limiter.