Note:

Synthetic lubricants must not be mixed with mineral-based lubricants!

Lubricate on site with “multi-purpose grease”, ABUS item number 101336.

Lubricate tooth segment during:

─     Assembly and disassembly

─     General overhaul

   Regularly check that the toothed segment is completely lubricated and the lubricant is not dirty.

   If the lubricant is dirty: Clean the toothed segments and reapply lubricant.

Lubrication ex works with “CLP PG DIN 51502”.

Quantity with size WL 35: 0.34 L
Quantity with size WL 50: 0.56  L
Quantity with size WL 60: 1.05  L
Quantity with size WL 70: 2.26  L

Lubricate the gear unit during:

─     General overhaul

   The gear unit in the slewing drive is lubricated for its entire service life. At the end of its service life (in a general overhaul), assess whether the lubricant needs to be changed.

Lubricate on site with “multi-purpose grease”, ABUS item number 101336.

Quantity: 80 ml

Lubricate slew bearing during:

─     Assembly and disassembly

─     General overhaul

For details, see Pre-assembling the upper wall mount: or Pre-assembling the lower wall mount:.