Inspecting the hexagonal nuts and lock nuts on the pillar mounting

Only when there is a dowel plate and intermediate plate on the floor of the building and an intermediate plate on the hall ceiling

 

	Lock nut
Hexagonal nut

    Inspect the hexagonal nuts and lock nuts on the dowel plate or intermediate plate.

    They must all be present, be undamaged and be tightened with the correct tightening torque.

    Otherwise replace the hexagonal nuts and lock nuts, and tighten them with the correct tightening torque. See the product manual for pillar mounting.

 

Only when there are anchor rods and ideal anchor screws

 

	Lock nut
Hexagonal nut

    Inspect the hexagonal nuts and lock nuts on the pillar base.

    They must all be present, be undamaged and be tightened with the correct tightening torque.

    Otherwise replace the hexagonal nuts and lock nuts, and tighten them with the correct tightening torque. See the product manual for pillar mounting.