Only with reeving 4/1
|
Bolt with SL safety clip |
Bearing bush |
|
| |
|
Cover |
Deflection roller |
Inspect the deflection roller
crosshead.
The drilled holes must not exhibit any cracking or other
damage.
Inspect the deflection roller.
It may not exhibit any deep grooves
or heavy wear.
If necessary, the deflection roller can be carefully inspected using a special template. Please contact ABUS Service for this. See ABUS Service.
Bolts and SL safety clips
must be in place and secured.
Check bearing bushes for damage. The bearing bushes must not exhibit
any cracking or other damage.
If components are missing or damaged: replace the components.
See Exchanging the deflection roller crosshead.