With this parameter you can read the motor current [in A]. The measurement can only be made with the motor running. After switching off the motor, the display remains unchanged until a new measurement is made. The crane is therefore functional in this parameter and can lift/lower.

The displayed value can lie between 0 A and 185 A.

   Select parameter P 7.5 with the arrow buttons.

   Press Enter briefly.

●   The parameter is opened and 00.00 is shown in the display.

   Press “Lift” or “Lower”.

●   The current value is displayed.

Next, the parameter level must be called up again in order to exit the parameter:

   Hold Enter pressed until “Code” or “P-nr” appears in the display.

   Open the parameter level.

   Exit the parameter level via P 9.9.