These parameters show the load-proportional frequency of the measurement bolt [in kHz] of the respective input. The displayed values can lie between 0 kHz and 65,535 kHz.

   Select the corresponding parameters with the arrow buttons:

─     P 7.1 for device's own load signal (input F1)

─     P 7.2 for the load signal at input F2

─     P 7.3 for the load signal at input F3

   Press Enter briefly.

●   The parameter is opened and the current value is displayed.

Next, the parameter level must be called up again in order to exit the parameter:

   Hold Enter pressed until “Code” or “P-nr” appears in the display.

   Open the parameter level.

   Exit the parameter level via P 9.9.