These parameters show the load of the respective hoist [in t]. The displayed values can lie between 0 t and 127 t.

   Select the corresponding parameters with the arrow buttons:

─     P 7.01 for device's own hoist

─     P 7.02 for the hoist at input F2

─     P 7.03 for the hoist at input F3

   Press Enter briefly.

●   The parameter is opened and the current value is displayed.

Next, the parameter level must be called up again in order to exit the parameter:

   Hold Enter pressed until “Code” or “P-nr” appears in the display.

   Open the parameter level.

   Exit the parameter level via P 9.9.