In this parameter you enter the maximum load capacity of the crane. If only one hoist is evaluated, the maximum load capacity is always the same as the maximum capacity of the device's own hoist.

Note

For an evaluation of the total load, the maximum load capacity of the entire crane may be less than the sum of the individual load capacities of the hoists. This is the case, for example, if the LIS-SV monitors the total load and the individual load capacities are greater than the maximum load capacity of the crane (e.g. 5 t (5 t/3 t).

   Select parameter P 0.0 with the arrow buttons.

   Press Enter briefly.

●   The parameter is opened.

   Enter the maximum load capacity of the crane with the arrow buttons.

   Press Enter briefly.

●   The value is saved.