Select parameter P 1.3 with
the arrow buttons.In this parameter you enter the correction factor of the current transformer modules from ABUS. Take the values from the following table.
|
Measurement range |
IN [A] current transformer module |
Correction factor |
Article number |
|
0 |
3 |
0115 |
19683 |
|
I |
8 |
0306 |
9743 |
|
II |
16 |
0613 |
9744 |
|
III |
23 |
0873 |
9745 |
|
IV |
36 |
1381 |
9746 |
|
V |
60 |
2344 |
9747 |
|
VI |
136 |
5169 |
19682 |
Select parameter P 1.3 with
the arrow buttons.
● The parameter is opened.
● The current value is displayed.
Hold Enter pressed.
Enter value from the table with
the arrow buttons.
Press Enter briefly.
● The value is saved.