─ ABUS cranes can be cable-controlled using the ABUS ABUCommander pendant control.
─ For this the pendant control is connected directly to the trolley or a mobile control by a control cable and hangs down to the level of the crane operator.
─ ABUS pendant control can be used to operate all the normal crane functions (crane travel/slewing, trolley travel, lifting/lowering) and, depending on the crane equipment, many additional functions.
─ Optionally, the pendant control can be fitted with additional buttons, a rotary or key switch, a signal lamp and a load display.
─ The pendant control features an ergonomic design for a comfortable grip. The crane functions can be operated with one hand. The buttons are large-sized and have a long hook path for safe operation.
─ The pendant control contains switch elements for switching the contactors in the control (version S) or switch elements, which switch the power to the hoist motor and travel motor (direct control). The housing of the pendant control for contactor control is therefore has an especially slim-lined design.
─ The pendant control has a housing made of impact- and scratch-resistant plastic, which makes it stable and robust.
─ The pendant control is designed such that it can be optimally operated, held and re-tightened.
─ On a crane with radio remote control the pendant control can also act as a replacement control in the event of a failure.
The control cable:
─ The control cable connects the mobile control or the trolley with the pendant control.
─ The control cable directly ensures the strain relief. This means no separate strain relief is required.
─ The pendant control can be quickly disconnected from the control cable for service purposes and in emergencies. The plug-in connection is fitted with a bayonet coupling or bayonet connector for this reason.
HT 211 D, HT 611 D pendant controls:
|
Electrical connection |
| |
|
Rated insulation voltage Ui (group C) |
500 V | |
|
Rated operating current Ie (at 400 V/50 Hz) |
5 A | |
|
Service life for mixed operation (75 % utilisation category AC3 and 25 % utilisation category AC4, switching rate 600 switches/hour; 40 % duty cycle) |
at rated 1.5 kW |
1.5x106 switches (number of switching procedures) |
|
at rated 2.2 kW |
0.6x106 switches (number of switching procedures) | |
|
Mechanical service life |
2.0x106 switches | |
|
Ambient conditions for operation | |
|
Protection class |
IP 65 |
|
Ambient temperature |
-20 C to +70 C |
HT 211 S, HT 611 S, HT 1011 S pendant control:
|
Electrical connection | |
|
Rated operating voltage |
250 V |
|
Rated operating current Ie |
1 A |
|
Service life: (utilisation category AC11, 230 V) |
2.0x106 S (number of switching operations) |
|
Ambient conditions for operation | |
|
Protection class |
IP 65 |
|
Ambient temperature |
-20 C to +70 C |
Control cable:
|
Electrical connection | |
|
Operating voltage |
500 V |
|
Mains frequency |
50/60 Hz |
|
Current consumption |
5 A |