The push trolley HF and the electric trolley EF are to be used exclusively for moving a single-girder crane EHB-I or double-girder crane ZHB-I in a horizontal plane. The trolley is suspended for this from an I-beam with the appropriate width. The flange of the I-beam can be inclined a maximum of 15°. On the chain hoist or crane, the travelling trolley can be rigged with a load, which is then moved horizontally above the floor.

─     Do not exceed the maximum load capacity.

─     Dimension the entire supporting structure appropriately for the load-bearing capacity as well as the dead load of the trolley.

─     Only install cranes and hoists on the trolley which can be permanently and securely mounted and for which this use has been approved.

─     Long-term usage only under weatherproofed ambient conditions. Temporary use outdoors in rain or snow is permitted.