Lubricants

 

Note:

Synthetic lubricants may not be mixed with mineral-based lubricants!

 

 

Hoisting gear GM 800

Lubrication ex works using lubricant with the standard designation “SAE POW-90 DIN 51502”.

 

Quantity: 1500 ml

Alternatively: use lubricant with the standard designation “CLP ISO VG 680 DIN 51502”

 

 

*    The hoisting gear is lubricated for its entire service life.

This applies with an average daily hoist running time of less than one hour with a medium or limited load spectrum.

At the end of its service life (in a general overhaul), assess whether the lubricant needs to be changed.

 

 

Hoisting gear GM 1000

Lubrication ex works using lubricant with the standard designation “CLP ISO VG 680 DIN 51502”

 

Quantity: 1600 ml

 

*    The hoisting gear is lubricated for its entire service life.

This applies with an average daily hoist running time of less than one hour with a medium or limited load spectrum.

At the end of its service life (in a general overhaul), assess whether the lubricant needs to be changed.

 

 

Hoisting gear GM 2000

Lubrication ex works using lubricant with the standard designation “CLP ISO VG 320 DIN 51502”

 

Quantity: 500 ml

Alternatively: use lubricant with the standard designation “CLP ISO VG 680 DIN 51502”

 

 

*    The hoisting gear is lubricated for its entire service life.

This applies with an average daily hoist running time of less than one hour with a medium or limited load spectrum.

At the end of its service life (in a general overhaul), assess whether the lubricant needs to be changed.

 

 

Hoisting gear GM 3000

Lubrication ex works using lubricant with the standard designation “CLP ISO VG 320 DIN 51502”

 

Quantity: 800 ml

Alternatively: use lubricant with the standard designation “CLP ISO VG 680 DIN 51502”

 

 

*    The hoisting gear is lubricated for its entire service life.

This applies with an average daily hoist running time of less than one hour with a medium or limited load spectrum.

At the end of its service life (in a general overhaul), assess whether the lubricant needs to be changed.

 

 

Hoisting gear GM 5000

Lubrication ex works using lubricant with the standard designation “SAE 80W-90 DIN 51502”.

 

Quantity: 4000 ml

Alternatively: use lubricant with the standard designation “CLP ISO VG 680 DIN 51502”

 

 

*    The hoisting gear is lubricated for its entire service life.

This applies with an average daily hoist running time of less than one hour with a medium or limited load spectrum.

At the end of its service life (in a general overhaul), assess whether the lubricant needs to be changed.

 

 

 

Hoisting gear GM 6000, GM 7000

Lubrication ex works using lubricant with the standard designation “CLP ISO VG 680 DIN 51502”

 

Quantity GM 6000: 13000 ml
Quantity GM 7000: 27000 ml

 

*    The hoisting gear is lubricated for its entire service life.

This applies with an average daily hoist running time of less than one hour with a medium or limited load spectrum.

At the end of its service life (in a general overhaul), assess whether the lubricant needs to be changed.

 

 

 

Lubricant repository in the cable drum

Lubricated at factory with "high temperature paste PBC 1574" item number 303678.

 

Quantity GM 800: 25 g
Quantity GM 1000: 25 g
Quantity GM 2000: 50 g
Quantity GM 3000: 50 g
Quantity GM 5000: 70 to 75 g
Quantity GM 6000: 70 to 75 g
Quantity GM 7000: 70 to 75 g

 

 

*    Fill the lubricant repository (behind the gearing):

─     When the hoisting gear is disassembled and reassembled

─     When carrying out a general overhaul.

─     After 10 years at the latest

The specification of 10 years applies to single-shift operation with an average daily hoist running time of less than one hour with a medium or limited load spectrum. If the hoist is used more intensively or the operating conditions are more difficult (e.g. multiple-shift operation, higher ambient temperature, aggressive environmental conditions), shorter intervals will be necessary.

 

 

 

Gearing in the cable drum

Lubricated at factory with high temperature paste PBC 1574 item number 6758.

 

Quantity: Apply lubricant with brush to coat surface completely.

 

 

*    Lubricate the gearing in the cable drum:

─     When the hoisting gear is disassembled and reassembled

─     When carrying out a general overhaul.

─     After 10 years at the latest

The specification of 10 years applies to single-shift operation with an average daily hoist running time of less than one hour with a medium or limited load spectrum. If the hoist is used more intensively or the operating conditions are more difficult (e.g. multiple-shift operation, higher ambient temperature, aggressive environmental conditions), shorter intervals will be necessary.

 

 

 

Gearing on output shaft on the hoisting gear,
pins on the hoisting gear

Lubricated at factory with high temperature paste PBC 1574 item number 6758.

 

Quantity: Apply lubricant with brush to coat surface completely.

 

 

*    Lubricate pins:

─     When the hoisting gear is disassembled and reassembled

*    Lubricate the gearing on the output shaft:

─     When the hoisting gear is disassembled and reassembled

─     When carrying out a general overhaul.

─     After 10 years at the latest

The specification of 10 years applies to single-shift operation with an average daily hoist running time of less than one hour with a medium or limited load spectrum. If the hoist is used more intensively or the operating conditions are more difficult (e.g. multiple-shift operation, higher ambient temperature, aggressive environmental conditions), shorter intervals will be necessary.