Only for GM2, GM4 and GM6
(GM6 with plastic chain box)
The illustrations show a chain box being installed on the GM6
chain hoist. Installation on a GM2 or GM4 chain hoist is very similar.
Installing the
chain box
|
Bolt |
SL
safety clip |
|
|
|
|
Chain box |
|
|
|
Place the chain in the chain
box.
Turn the chain box as shown in
the figure (slanted side facing outward).
Use the bolts to install the
chain box on the chain hoist.
─ For GM2:
Use a bolt to fix the chain box to the chain hoist.
─ For GM4
and chain box with one hole: Use a bolt to fix the chain box to the chain hoist.
─ For GM4
and chain box with two holes: Use a bolt to fix the chain box to the chain
hoist. Use the inner holes of the chain box. The outer holes remain free.
─ For GM6
and plastic chain box: Use two bolts to fix the chain box to the chain
hoist.
Secure the bolts with the SL safety
clips (1x or 2x).
Attach
buffer
|
|
Suspension straps |
|
|
|
Buffer |
Bolt |
|
|
|
Turn the buffer as shown in the
figure (rounded side facing inward).
Push the buffer between the
suspension straps on the chain hoist.
Push the short bolt through the
outer holes of the suspension straps and the buffer.
Only for GM6 (GM6 with chain
box with metal frame) and GM8
The illustrations show a chain box being installed on the GM8
chain hoist. Installation on a GM6 chain hoist is very similar.
Installing the
chain box
|
Inner hole |
Bolt |
|
|
|
Chain box |
SL safety clip |
Place the chain in the chain
box.
Turn the chain box as shown in
the figure (bar facing outward).
Use the bolts to install the
chain box on the chain hoist.
─ For GM6
and chain box with metal frame: Use a bolt to fix the chain box to the chain
hoist. Use the inner holes of the suspension strap. The outer holes of the
suspension strap remain free.
─ For GM8:
Use a bolt to fix the chain box to the chain hoist. Use the inner holes of the
suspension strap. The buffer is fixed to the outer holes of the suspension
straps.
Secure the bolts with the SL safety
clips (2x).