The following sections show how the chain hoist is installed.

─     First, the suspension bracket of the chain hoist is prepared and the chain hoist is attached to the supporting structure. See page°14.

─     Then, the bayonet connector is connected to the connecting cable and the connecting cable is inserted into the chain hoist. See page 16.

─     Then the chain box is installed. See page 18.

─     Finally, the chain is lubricated. See page 19.

─     Only with chain hoists with a hoist limit switch: Lastly, the switching points of the mechanical hoist limit switch (page 20) or the electronic hoist limit switch (page 23) and, if applicable, the intermediate switching point of the electronic hoist limit switch (page 25) are set.