Overview of screw tightening torques

Flange plates

Size	Type, size and length	Number	Tightening torque
GM 800	Hexagon head screws M12x40	10	85 Nm
GM 1000	Hexagon head screws M12x40	15	85 Nm

Wheel carrier

On the wheel carrier:

─ Rib screw M10x40

─ 5x per wheel carrier

─ 75 Nm

On the guide roller:

─ Stud M10

─ 1x per wheel carrier

─ 30 Nm

Belt guard

─ Rib screw M8x16

─ 2x

─ 25 Nm

Drive

─ Rib screw M6x16

─ 2x

─ 11 Nm

Travel motor

─ Rib screw M8x25

─ 4x

─ 25 Nm

Hoist drive

Size	Type, size and length	Number	Tightening torque
GM 800	Fillister-head screw M10x110	4	25 Nm
GM 1000	Fillister-head screw M12x120	4	85 Nm

Hoist motor

─ Rib screw M8x25

─ 4x

─ 35 Nm

End clamp

Size	Type, size and length	Number	Tightening torque
GM 800	Fillister-head screw M6x20	2x	10 Nm
GM 1000	Fillister-head screw M8x20	2x	25 Nm

The fillister-head screws are bolted with a thread lock coating or a thread lock. The residues must be completely removed before the fillister-head screw may be used again.

The thread lock coating as well as the thread lock are single-use only.

Rope guide runner

Size	Screw	Number	Tightening torque
GM 800	Self-tapping screw 60x16	1x	5 Nm
GM 1000	Self-tapping screw 60x16	1x	5 Nm

Joining element

Size	Screw	Number	Tightening torque
GM 800	Self-tapping screw 60x16	4x	5 Nm
GM 1000	Self-tapping screw 60x16	4x	5 Nm

Dead end rope grip

Size	Wire rope	Rib nut	Number	Tightening torque
GM 800	Ø 6.5 mm	M6	2x	5 Nm
GM 1000	Ø 8.0 mm	M8	2x	10 Nm