Only with double lifting speed
This section only applies if the wire rope hoist can lift/lower with double lifting speed.
The function is continually activated and must be switched on separately.
|
|
Danger due to long braking distance! When working at higher lifting speeds, the braking distance lengthens. At doubled lifting speed, the braking distance becomes four times longer. Potentially fatal accidents could occur. Not the longer breaking distance when working at double lifting speed! |
Lift/lower the load with the
crane as usual.
● ABUControl or the LIS-SV on ABUS electrics 3 ascertains the suspended load.
● The wire rope hoist can be accelerated to a greater maximum lifting speed than normal, depending on the weight of the suspended load.
─ With a light load (down to an empty load hook), the maximum lifting speed of the wire rope hoist is up to twice the normal maximum speed.
─ The heavier the load, the lower the maximum speed when lifting or lowering.
─ At the maximum load, the wire rope hoist can only be lifted/lowered at the normal maximum lifting speed.
|
Normal lifting speed |
Higher
lifting speed |
|
| |
|
Maximum load capacity |
Maximum lifting speed |
