Lifting and lowering, crane travel, trolley travel

Only with pendant control

See the pendant control product manual.

 

Only with radio remote control

See the ABURemote product manual.

 

Only with two-stage movement profile (ABUControl) and with ABUS Electrics 3

This section applies only to cranes with ABUS Electrics 3 with two-stage travel drives and/or hoist drives (without ABULiner)...

... and to cranes with ABUControl. With ABUControl, you can toggle at will in the ABUS KranOS movement profile control between a continuous and a two-stage movement profile.

 

 

The lifting speed and travel speed can be controlled in two levels (slow and fast).

 

 

   Half-press the button (stage 1).

●   The crane lifts or lowers at a slower speed.

 

   Press the button completely (stage 2).

●   The crane accelerates and lifts/lowers/travels at a faster speed.

 

   Release the button halfway (back to stage 1).

●   The crane brakes and lifts/lowers/travels at low speed again.

 

   Release the button.

●   The crane brakes and comes to a standstill.

 

Only with a continuous movement profile (ABUControl) and with ABUS Electrics 3 with ABULiner

This section applies only to cranes with ABUS Electrics 3 with continuous acceleration of the travel drives and/or hoist drives (with ABULiner frequency converter)...

... and to cranes with ABUControl. With ABUControl, you can toggle at will in the ABUS KranOS movement profile control between a continuous and a two-stage movement profile.

 

The lifting speed and travel speed can be controlled continuously.

 

 

 

   Half-press the button (stage 1).

●   The crane lifts/lowers/travels at the slowest speed.

 

   Press the button completely (stage 2).

●   The crane accelerates.

 

 

   Half-press the button again (stage 1).

●   The crane no longer accelerates and continues lifting/lowering/travelling at the current speed.

 

 

   Release the button.

●   The crane brakes.

 

   Half-press the button again.

●   The crane no longer brakes and continues lifting/lowering/travelling at the current speed.

 

   Press the opposite button completely.

●   The crane brakes very quickly.

 

Only with crane travel, trolley travel, slewing by hand

 

   Pull or push on the load, the bottom block, the hook assembly, the lifting tackle or load lifting attachment to move the load.

Do not pull on the pendant control in order to move the load or the empty load hook.

   Only pivot or move the load if it can be easily and safely stopped by hand.