Emergency stop

 

Gebot Anleitung lesen

Observe the product manuals!

In addition to the points described here, all information in the section “Emergency stop” in the other supplied product manuals also applies.

 

The images show the emergency stop button on the pendant control. The emergency stop function for the radio remote control units does not essentially differ from the mode of operation on the crane.

See also the ABURemote product manual.

 

 

In the event of dangerous situations with the crane with pendant control:

Emergency stop switch

 

*   Press the emergency stop switch.

●   The crane brakes immediately; the load hook halts.

●   With joint operation of two trolleys: Both trolleys brake immediately and come to a standstill.

●   With tandem operation: Both cranes brake immediately and come to a standstill.

 

 

When the danger has been eliminated:

Warnung stürzende Last

Danger of load drop due to accidental individual operation!

Depending on the radio remote control, tandem operation or joint operation of two trolleys may no longer be active after switching on. This means the joint load could be accidentally transported with only a single crane or trolley and fall, killing or injuring people the in process.

After the emergency stop, check whether tandem operation or joint operation of two trolleys is active.

 

Emergency stop switch

 

*   With pendant control: Turn the emergency stop switch a quarter-turn clockwise.

*   With radio remote control: Switch on the transmitter of the radio remote control and log in to the receiver.

See the ABURemote product manual.

*   Check whether the correct trolley has been selected or whether joint operation of two trolleys or tandem operation is active.

See the ABURemote product manual.

●   The crane is ready for use.

●   The crane does not start moving automatically after the emergency stop button has been unlocked.

As normal, the buttons for crane travel, trolley travel or lifting/lowering must be pressed.