Declaration of Conformity, Declaration of Incorporation

Only within the EU

 

If the crane is sold by ABUS as a stand-alone machine, a Declaration of Conformity is issued. It can be found in the test log book of the crane.

The Declaration of Conformity or Declaration of Incorporation issued by ABUS becomes invalid if independent reconstruction or modifications to the crane are performed.

 

 

─     1: ABUS company address

─     2: Person responsible for putting together the special technical documentation

─     3: Technical specifications identifying the crane

─     4: Information on the fundamental standards underlying development and production.

─     5: Signature of responsible person

 

 

If the crane is sold by ABUS as a component, in separate components or for installation in another machine, a Declaration of Incorporation is issued in terms of the machinery directive of Appendix II 1B. It can be found in the test log book of the crane.

Putting into service is then prohibited until it has been ascertained that the installation into which the ABUS components are to be installed meet all requirements of the EU directive versions applicable at the time of issuance.

A test must be performed on the ABUS components prior to initial commissioning, before the Declaration of Conformity for the entire installation is issued. See Test before initial commissioning.

 

 

─     1: ABUS company address

─     2: Person responsible for putting together the special technical documentation

─     3: Technical specifications identifying the crane

─     4: Information on the fundamental standards underlying development and production.

─     5: Signature of responsible person