All PIN levels can be switched off simultaneously here.

If PIN levels are deactivated, they are only deactivated in the transmitter. The factory configuration of the receiver is not affected by this. This means that the protected functions (“Override travel limit switch” and “Switch off load limiting system”) are then unavailable.

Only Pin level 0 is completely deactivated by this, since it is only saved in the transmitter. The transmitter can afterwards be switched on or logged in without having to enter a PIN.

The menu item can be opened with the transmitter logged out or with it logged in.

   Hold MENU depressed (5 seconds).

●   The code query appears on the display.

   Enter the code for the service menu.

See Entering the code or PIN.

The code for the service menu is “0055”.

   Open the menu item “Deactivate PIN”.

●   The display shows the “Deactivate PIN” prompt.

   Confirm using ENTER.