If no button is pressed on the transmitter within a certain time, the transmitter switches to “Standby” operating mode. This occurs both on a transmitter which is logged in and one which is logged out.

The ‘“Standby” operating mode allows the transmitter to save power and makes it safer if it has been put aside and forgotten.

The time which elapses before the transmitter changes to “Standby” can be set. See Setting standby.

To switch the transmitter back on:

   Either:

Press the On/Stop button.

Or:

Press the HORN button.

   Press ENTER to acknowledge the message.

●   The transmitter logs in to the receiver.

●   If the transmitter is protected by a PIN: The window “Enter PIN” appears on the display.

   Enter the set PIN for the desired function. See Entering the code or PIN.

   Press ENTER.

●   The display shows “Release”.

   Press the HORN button and let it go.

●   The sound of the horn can be heard at the transmitter and at the crane.

●   The crane is ready for use.