This shows how long the transmitter and receiver have been in operation. The operating hours counter counts upwardly minute-by-minute and is saved when the crane/transmitter is switched off.

The menu item “Transmitter” can be opened with the transmitter either logged out or logged in.

The menu item “Receiver” can only be opened with the transmitter logged in.

   Hold MENU depressed (5 seconds).

●   The code query appears on the display.

   Enter the code for the service menu.

See Entering the code or PIN.

The code for the service menu is “0055”.

   Open the menu item “Operating hours”.

   Open the menu item “Transmitter” or “Receiver”.

●   The operating hours of the transmitter or receiver are shown on the display.