This setting defines whether the transmitter and the receiver should transmit at full transmission power or whether the transmission power should be reduced.

If several radio systems (radio remote control for cranes, but also other systems with wireless connection) are operated in close proximity to one another, the signals of one radio system (particularly if the radio partner is located at a great distance) can be overshadowed by the adjacent range of a different radio system (especially if the radio partner of the other radio system is located close to the ABURemote transmitter or receiver).

In these cases it may make sense to reduce the transmission power of individual systems or even of all systems. If multiple transmitters are operated in small spaces, it is usually useful to reduce the transmission power of all transmitters. Adapting the transmission power of receivers is only recommended in exceptional cases.

The menu item “Transmitter” can be opened with the transmitter either logged out or logged in.

The menu item “Receiver” can only be opened with the transmitter logged in.

   Hold MENU depressed (5 seconds).

●   The code query appears on the display.

   Enter the code for the service menu.

See Entering the code or PIN.

The code for the service menu is “0055”.

   Open the menu item “Transmission power”.

   Open the menu item “Transmitter” or “Receiver”.

●   The transmission power currently set on the transmitter or receiver is shown on the display.

   Set the required value.

The transmission power can be set to 100%, 75%, 50%, 25% and 12%.

   Confirm the input with ENTER.