In dangerous situations with the crane:

   Press the On/Stop button.

●   The display shows “Stop”.

●   The transmitter sends a stop signal to the receiver.

●   The ready signal, which usually keeps transmitting a signal to the receiver, is interrupted.

●   The receiver receives the stop signal and stops receiving any ready signals from the transmitter.

●   The receiver activates the emergency stop on the crane.

●   The crane brakes immediately and comes to a standstill.

When the danger has been eliminated:

   Press ENTER to acknowledge the message.

●   The transmitter logs in to the receiver.

●   If the transmitter is protected by a PIN: The window “Enter PIN” appears on the display.

   Enter the set PIN for the desired function. See Entering the code or PIN.

   Press ENTER.

●   The display shows “Release”.

   Press the HORN button and let it go.

●   The sound of the horn can be heard at the transmitter and at the crane.

●   The crane is ready for use.