Only with positioning control
The positioning control enables crane and trolley to halt at previously specified positions within the traversing range.
This function can only be opened using a direct access button.
|
| |
|
|
Direct access button “Positioning” |
Move crane or trolley up
to the point just in front of the desired position.
Press the direct access
button “Positioning” (vertical line with arrows) and hold it.
● Now move the crane or trolley only at low speed.
Continue moving the crane
with the “Positioning” direct access button pressed.
● As soon as the position is reached, the crane or trolley halts.
● The “Position reached” signal lamp lights up.