Log in as user "Abnahme" (commissioning)
(user level [2]) in KranOS. See Connecting laptop or
tablet computer with ABUControl, page .All travel limit switches and hoist limiters (excepting the backup limiter) can be temporarily bridged, e.g. for repairs.
For this work step, access from a laptop or tablet computer to KranOS is necessary. The user "Abnahme" (commissioning) (user level [2]) must be logged in.
|
Overview: Navigation in KranOS |
|
User "Abnahme" (commissioning) à "Movement profile" From program version 1.2.0.4 |
Log in as user "Abnahme" (commissioning)
(user level [2]) in KranOS. See Connecting laptop or
tablet computer with ABUControl, page .
In the start window: Click on the "Movement
profile" menu item in the "Settings" menu (gear wheel on yellow background).
|
|
Danger due to bridged safety functions! If the travel limit switch and hoist limiter are bridged, the crane (the trolley) no longer stops and brakes at the intended switching points. This could result in dangerous situations where people can be killed or injured. Only bridge travel limit switch and hoist limiter for repairs or adjustment work. Work with particular caution when using the crane. |
|
| |
|
"Bypass all travel limit switches and hoist limiters" button |
|
● The "Movement profile" window appears.
Press the button "Bypass all travel limit
switches and hoist limiters".
● The button's background lights up green.
● All travel limit switches (trolley travel limit switches of all trolleys and crane travel limit switches in the form of cross-type limit switches, reflective light barriers as braking function and shut-down) and all hoist limiters (top and bottom hoist limiters of all hoists) as well as the building profile control, are bridged.
● Crane, trolley and hoist can run/lift at low speed.
● From program version 1.2.0.7: The message F0064 "All travel limit switches and hoist limiters bridged" is displayed.
● After 5 minutes, the bridging turns off again automatically.
