The sway control initially functions only with a single hoist or on a crane with several trolleys in individual control, providing the unused trolley is in parking position.
During the joint operation of several trolleys or in tandem operation, the sway control must be separately enabled. In addition, the ABURemote radio remote control must be specially configured for this as well as the cranes and trolleys which are of the same type.

For this work step, access from a laptop or tablet computer to KranOS is necessary. The user "Abnahme" (commissioning) (user level ‚[2]) must be logged in.

Log in as user "Abnahme" (commissioning) (user level [2]) in KranOS. See Connecting laptop or tablet computer with ABUControl, page  .

Select the desired hoist (e.g. Hoist 1) in the main menu.

●   The window for the requested hoist appears.

Click on the "Hoist profile parameter" menu item in the "Settings" menu (gear wheel on yellow background).

●   The "Hoist profile parameter" window appears.

Click on the "Sway control parameter" menu item in the "Settings" menu (gear wheel on yellow background).

●   The "Sway control parameter" window appears.

Enabling sway control:

─     "Only for single trolley": The sway control can only be activated for a single hoist or for a crane with several trolleys in individual control, providing the unused trolley is in parking position.

─     "Single and multiple trolleys (joint operation)": The sway control can be activated for a single hoist, for a crane with several trolleys in individual control or in joint operation, and for two cranes in tandem operation.

In addition, the ABURemote radio remote control must be specially configured for this as well as the cranes and trolleys which are of the same type.

The collective load must be attached such that the centres of gravity of the loads are the same on both hoists, meaning the hook position and the length of the lifting tackle give the same overall length when added together.